Trusted Solar Panel Manufacturer in INDIA
How Arkalight’s Structural Rigidity Eliminates Silent Failures During Installation
When you go to buy anything new, you don’t want to lose anything. This is also the case with solar panels. When you order solar panels for your factory or commercial plant, you have to purchase a very large quantity of solar panels. During this entire process, the possibility of damage to our solar increases. If any damage occurs to the panel, there is a possibility of your money going down the drain. Suppose you have bought a four-wheeler and when you go home after buying the four-wheeler, you are not relieved by sending the police and there is some defect in the engine, then the loss is yours alone. These types of defects are those that are not visible to the naked eye or from the outside. We come to know about them after using the item. Transportation of panels is a very important factor before rooftop solar installation. If the workers accidentally step on the solar panel during transportation or if micro cracks appear on the panel, it may not work properly after installation.
At Arkalight Solar, we believe that a panel is not just a device that generates electricity, but a machine that has to stand firm in harsh conditions for 25 years. In this blog, we will understand how Arkalight’s advanced structural engineering prevents this invisible damage.
While transporting solar panels, there is a possibility of damage to your panel which is not visible from the outside, i.e. even if a worker accidentally falls on your channel, a micro crack may appear on the panel. As a result, the silicon cells become weak.
If you do this slowly, your panel will not suffer any damage initially. But as your panel is used and the temperature increases, the power will decrease as a result.
After three to four years of solar panel use, such dark hotspots reduce the efficiency of your panel and no more units of electricity are generated.
You don’t need to be sure after reading or hearing such things, but when? When you have installed solar from Arkalight Solar.
Many solar manufacturing companies today use thin frames to reduce their costs, which increases the likelihood of early failure. Arkalight Solar uses 35 mm to 40 mm thick preforms which are very less likely to be damaged.
As the frame of the solar panel is thicker, the panel does not bend. As a result, the strength of the panel increases. The cells on top absorb the defects and the panel does not get damaged.
The glass we use not only lets in sunlight, but also acts as a ‘shield’ for the cells. This glass is extremely hard, capable of absorbing sudden shocks or pressure.
Remember that penal is made of a main glass layer and if this layer is weak, the chances of the panel being controlled increase in a short time, but we take special care of this matter and do not allow it to be damaged.
Between the cells and the glass there is a layer of EVA. The quality of this layer in Arkalight Solar is so superior that it provides a cushion like grip to the cells. even if the panel moves during installation, the cells remain stable in place.
According to the mentality of the people of India, panel installation is done very quickly and in a hurry.
If the panel is ordinary and of low quality, then it is likely to bend easily and the possibility of damage is high. Our panel is thick and strong enough that it does not allow the panel to bend easily.
Our panels are meticulously inspected before leaving the manufacturing factory. because once the product is delivered to the customer, if there is any complaint, it is not within our standards.
Arkalight Solar’s panels can withstand pressures up to 5400 Pa and our penals can withstand wind gusts up to 2400 Pa.
So if you have installed your solar panels in an area where the pressure is very high, you don’t need to worry because our panels are resistant to any weather conditions and do not lose efficiency.
✓ EL Testing
We do EL testing on every panel. Just as any defect in the bones of the body can be detected through X-rays, any damage or cracks in the panel can be easily detected and replaced through this testing. As a result, once the panel is delivered, there are no customer complaints and you can enjoy endless solar energy for 25 years without any worries.
FAQ
No, micro-cracks cannot be seen with the naked eye. An EL testing machine is required to see the cracks.
If the frame is weak and the panel bends, cracks form in the cells inside.
✓ Conclusion
When you choose to install solar for your home or industry, the most important step before saving on electricity bills is to ensure that your panels reach your home or industry safely. Arkalight Solar. Because we believe that if there is damage to the solar before installation, it is of no use and your investment is likely to go to waste.
Choose a panel for your home or factory that not only provides electricity, but also stands firm in any situation. For more information, contact our solar experts today or visit our website.
In the year 2025, the use of solar energy has increased significantly, especially in Gujarat and Surat. This is a true sign of a bright future.
Whether it is electricity or solar power, people always get worried when there is a blackout. That’s why it’s important to choose a solar system for your home that runs continuously and includes a strong battery backup.
First of all, Arkalight Solar would like to congratulate you because you are about to get your light bill zero.
We know you are very excited about this, but one question is bothering you, how long will the installation take?
Leading Solar Panel Manufacturer in INDIA Where we transform sunlight into power – for you and for the planet.
@ 2024 Copyrights Arkalightsolar. All Reserved
